Projecta IM2000 Instrucciones de operaciones descargar pdf (Pagina 73)

BB-34-4P Breakout Board

The BB-34-4P breakout board is

designed to provide a screw

terminal interface for the IM483-

34P1, IM483I, IM483IE and

IM804/805-34P1 microstepping

driver.

This interface is easily inserted

into the P1 pin receptacle.

Mechanical

Specifications and Wiring Recommendations

IMS recommends that the following wiring practices be used to interface to the

IM483-34P1 using the BB-34-4P:

 Wire Size: 16 - 22 AWG

 Strip Length: 0.200” (5mm)

 Screw Torque: 3.0 lb-in (0.33 N-m)

Mechanical specifications are illustrated in Figure D.4.

Installation

To install the BB-34-4P first remove the 34 pin header from the receptacle by

gently rocking it back and forth and lifting the pin header straight upwards. Do

not remove at a side-to-side angle.

Insert the breakout board into the P1 pin receptacle as shown in Figure D.6.

Mount to drive and heat sink plate using the recommended mounting hardware.

Dimensions in Inches (mm)

2.635

(66.92)

2.441

(62.00)

1.050

(26.67)

0.780

(19.81)

0.107

(2.72)

2X ØX 0.155

(2X ØX 3.94)

Figure D.4: BB-34-4P Mechanical Specifications

1 2 ... 68 69 70 71 72 73 74 75 76 77

Sin comentarios

Projecta IM2000 Instrucciones de operaciones Pagina 73